16m2 Top Cover Solution Dyed Polyester PU

This 16m2 cover tent is made of woven solution dyed pu coated polyester. The material is relatively thin but strong enough and reinforced where necessary. Because the material is solution dyed, it hardly fades. Even though the material is breathable on its own, there are ventilation screens on both sides.

The 16m2 cover tent covers the entire boat, can be used with a standing mast, and extends over the boom. There are two zippers on the port side by the mast and at the back near the cockpit. When you open both zippers, you can fold the part between them over the boom to create a large open space. The cover tent has cutouts for the rigging, mast, mooring lines, and outboard motor. There is a flap on the cutout for the outboard motor that can be removed when you have a motor at the back of the boat and can stay in place when not in use. The tent is weighted with removable sandbags. Since the sandbags are removable, the weight is fully adjustable, and the cover tent can be folded compactly. The tent also has 3 loops on each side. With these loops, you have the option to secure the cover tent with lines under the boat to prevent it from lifting in strong winds.

• Woven polyester with pu coating
• Solution dyed (minimal to no fading)
• Breathable
• Relatively thin but strong
• With ventilation screens
• Reinforced where necessary
• Covers entire boat
• For standing mast
• Over the boom for good drainage
• Water repellent
• Cutout with flap for outboard motor
• 2 zippers on the side for access
• Zipper by mast closes bottom to top
• Zipper at the back closes top to bottom
• Cutouts for rigging
• Cutouts for mooring lines at the back
• Closable around mast
• Loops underneath for extra securing under the boat
• Includes 12 removable sandbags
• Weight excluding sandbags: about 5.1kg
• Weight including sandbags: about 11.1kg